Kohler, AquaGlass, Lasco, American Standard, Jacuzzi, Americh, BainUltra, Sterling, Home Depot, Lowes, Bathtub, shower, sink, toilet, plastic, fiberglass, acrylic, gelcoat repair kits
 
Bathtub Repair, Acrylic Repair, Fiberglass Repair, Porcelain Repair, Ceramic Repair  - Surface Repair Products
Acrylic / Gelcoat Bathtub and Shower Repair Products
Product Categories:
 
Manufacturers:

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

General colors also available. Click here for more info.
bathtub refinishing

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

  • Manufacturers
  • "3 Easy Steps!"
  • Accessories
  • Technical Info
  • Shipping & Returns
All of our bath tub/shower stall surface repair kits are factory color-matched. We also offer colors for general plastics, cultured marble, simulated marble and counter tops. If you do not see the make of your tub/shower stall showcased below it does not mean that we do not offer it. Please contact us for information and pricing.
 
Kohler Repair kit
Lasco Bathware Repair kit
Jacuzzi Repair kit
 
AquaGlass Repair Kit
Americh Repair Kit
Bain Ultra Repair kit
 
Sterling Repair kit
American Standard Repair kit
Other available colors Not sure or don't see what you're looking for?
^ back to top
We also carry product to color match and repair the following:
Jet Ski fiberglass repair kit
Jet Ski Repair Kit
Jet Skis
 
fiberglass boat repair kit
Jet Ski Repair Kit
Boats
 
RV crack, patch repair kit
Jet Ski Repair Kit
RVs
Surfboard fiberglass & Acrylic repair kit
Jet Ski Repair Kit
Surfboards
 
kayak repair kit
Jet Ski Repair Kit
Kayaks
 
ATV, Quad fiberglass repair kit
Jet Ski Repair Kit
ATVs
Fiberglass, acrylic, plastic, cultured marble repair
^ back to top
The photos and instructions displayed below will show you exactly how simple it is to do your own repairs in just 3 easy steps. For additional instructions click here or view below. Also, if you are planning on doing multiple repairs, we recommend purchasing our accesories by clicking on the "Accessories" tab above.
STEP 1

DIY Bath and Shower Repair Kit - Step 1Prepare the chip, gouge or crack by using a grinding tool, putty knife, razor knife or other sharp tool. Be sure to create a "V" shape going throught the depth of the surface (color) stopping at the fiberglass structure - 1/16" to 3/16" deep.

Wipe the area with a cloth or paper towel and use the sandpaper included to smooth out the repair area. Finally, remove all particles and clean area with acetone or nail polish remover. Your work area is now ready for Step 2.

Click here for Step 2.

STEP 2

DIY Bath and Shower Repair Kit - Step 1Dispense a desired amount of Poly Paste into one of the mixing cups included in the kit. Add 4 drops of catalyst per 1/4 ounce (16 drops per ounce - entire jar is 3 oz.).

Mix the catalyst and the Poly Paste together using the smaller stir stick from the kit. Once this is done apply mixture to the repair area with the larger mixing stick. Be sure to over fill the crack or chip slightly. Your work area is now ready for Step 3.

Click here for Step 3.

STEP 3

DIY Bath and Shower Repair Kit - Step 1Wait one hour or until material hardens. At this point a heat gun or ordinary hair dryer can be used to speed up drying time. You will then use the sand paper so that the contour of the repair matches the surrounding area.

Using a soft cloth, (or a buffing pad if preferred), and the supplied rubbing compound, hand rub area to polish and blend in the repaired area. Your repair is now finished.

Click here to start over.

ADDITIONAL INSTRUCTIONS:
TONING: Toners are used for shading the Poly Paste color darker or lighter. Before adding catalyst to mixture add desired amount of Poly Paste in mixing cup provided. Adjust color by adding 1 drop of white or black toner and mix in thoroughly. Check color then add more white or black in small amounts until desired color is achieved. Then add catalyst to mixture.
SANDING: For best results wet sand with wet/dry sandpaper and water (220, 320, 400, and then 600 grit sandpaper.)
BUFFING: Machine buffing is acceptable using an automotive quality buffer and supplied rubbing compound. Recommended speed is 1800 to 2800 RPM.
SAFETY: Use proper ventilation. Avoid contact with skin and eyes.
ACCESSORIES
 
The products below will assist in the repair process utilizing the materials from our DIY Bathtub and Shower Paste Repair Kit (Acrylic / Gelcoat). The same repair can be done with only the contents of the kit.
Mini Buffing Pad Set
Mini Buffing Pad (use with 2500 RPM & Drill)
Mini Buffing Pad Set
Plexus Surface Cleaner, Protectant and Polisher
Mini Buffing Pad Set
Dust Mask (one dozen)
Mini Buffing Pad Set
Sandpaper 7-pack (Seven full sheets wet/dry sandpaper) 1 each 220, 320, 400, 600, 1200, 1500, 2000 grit
Material Safety Data Sheets (MSDS)
Below you will find forms that contains detailed information about the possible health and safety hazards of our DIY Bath and Shower Repair Kit product and how to safely store, and handle the product. Note: all documents below are in .pdf format and require that you have Adobe Acrobat Reader installed on your system. If you do not have it installed you can click on the logo below.
 
 
 
SHIPPING & RETURNS
Shipping Locations
Multi-Tech Do-It-Yourself Products are available for shipment to locations in the United States including Alaska, Hawaii, US territories and Canada.
 
Shipping Charges

Our shipping charges include a handling fee along with standard UPS ground charges. All orders that are placed from Hawaii, Alaska or Canada will incur an extra shipping charge.

Please Note: In most cases, orders are shipped same day the order is placed (To ship same day, order must be placed Mon - Fri before 2pm PST). Orders placed Friday (after 2pm PST) through Sunday are usually shipped on Monday. For additional questions about your shipping options, please contact us at 1-800-218-2066.

 
CUSTOMER SERVICE
Toll-Free / Email:
1-800-218-2066
Sales
Customer Service
Technical Support
Marketing
Webmaster
International Shipping
For ordering outside of the US and Canada, contact Multi-Tech Products for pricing and/or shipping arrangements. Most of the products we offer are considered HAZMAT so we require a minimum order of $150.00 USD.
 
Carriers
All orders are shipped via UPS or FedEx.
 
P.O. Boxes
Multi-Tech Products does not ship to P.O. Boxes.
 
Returns

In the case of a return for refund, any shipping and/or handling charges on the original order will not be refunded. At our discretion, we may levee a restocking fee of 15% of the cost of items returned.

Multi-Tech Products is not responsible for return shipping costs or damage on returned items. Units to be returned should be packed carefully in their original packaging. Please be advised that packages sent by normal US Postal Service cannot be tracked to ensure delivery. Since Multi-Tech Products cannot provide credit for a return without confirming its receipt, we recommend that you use a delivery service that can be tracked and or insured.

 
Solution Graphics

© 1992 - 2011 Multi-Tech Products Corporation. All rights reserved.
Surface Repair products, logos and all respective media are
property of Multi-Tech Prducts Corporation. Privacy Statement.